建议大家在破解之前，仔细阅读破解步骤说明和注意事项。作者: nj-quack 时间: 2011-2-12 09:52
Unlocking the Bell 2Wire 2701HG-G
1. Download the Singtel firmware (Direct Link: 2Wire 2701HG-G Singtel Firmware (1466)|Rapidshare)
2. Access your router’s firmware update page, I have listed all the possible web portal addresses that I have encountered, one of them SHOULD work for you. (http://gateway.2wire.net/tech/upgrade.html | http://192.168.2.1/tech/upgrade.html | http://192.168.1.254/tech/upgrade.html)
3. Select the Singtel 2sp file which you downloaded from above and click Update. (You should only do this through a wired connection and not wireless.)
4. Hopefully after a successful flash access the router’s Setup page (http://192.168.1.254/setup | http://192.168.2.1/setup | http://gateway.2wire.net/setup)
5.Enter this Key Code (5225-26P4-6262-22AS-B2E7) and click Advanced, now continue with the setup, and it will not append the @Singtel.com to the end of your B1 username. This is the only Key Code that worked for me as the others would fail even if we had the correct username/password combination. If this Key Code does not work for you check out all the rest of the Key Codes at the 2Wire website.
That is all, your Modem/Router should now connect to bell. The reason I wrote this tutorial, was because I saw that the information was scattered all over the forums, with a bit of correct information everywhere, and not all in one place. If I have made a mistake please point it out so I can fix this. Also I would hope that Bell and other ISPs find this post, and see how much users are frustrated with their branded hardware. Hopefully they will start using less restricted, and user changeable hardware/software. While it might be easier in the short run, I find that in the long run it is more costly, more annoying, and more problematic since there are such few firmware updates. Enjoy your unlocked/updated Modem/Router.
Ps. So far my friend’s iPad is working without a problem. Hopefully it stays that way.作者: nj-quack 时间: 2011-2-12 10:01
到这个网址，直接下载未加密码的解锁软件，以及说明，我搞好了。操作时，要网线连接，不能无线连接，切记！