第一次是在 Nissan dealer 修完车,发现小裂缝,最后和他们理论的结果,是一人一半,原厂玻璃,我出了250刀。
第二次,我自己敲裂的,去加艺(Auto Vie) , 他们打电话帮预约联系的一家专门换档风玻璃的公司, 约定的时间,两个人开面包车来,车上好像写着大字 Windshield Mobile 还有法文。不到一个小时全都搞定。全新玻璃,我付了大概230刀。车是 Nissan Altima 2000 款。
不确定是不是这个公司。 也可以修理, 可以参考。
http://www.windshield-montreal.com/
<center>Our technicians use only the best quality products and equipment that comply with the industry standards.</center>
CHIPPED WINDSHIELD
We repair your windshield, no appointment necessary, in 45 minutes or less. A windshield repair will not only restore strenght to the glass, it is also safer, more ecological and an economical alternative to total replacement. Our high quality resin provides quality repairs. Most people are covered for windshield repair without a deductible. Yes in 90% of the time it’s totaly free.
STAR BREAK:
One or several cracks from the point of impact.
To prevent the spread of cracks, it is essential that all cracks are filled with resin to the extremities.
BATWING:
A point of impact with 2 small cracks.
If it expands to the border it becomes non repairable.
BULLSEYE:
Frequent on new thinner windshield.
The conical configuration of the breakage, extands to the middle membrane.
Has cracks not connected to the cone.
COMBINATION:
The most common failure
It is a bullseye with cracks connected to the cone.
The central cone can be composed of glass crushed or busted
Sometimes even showing a large cavity.
<center>Windshield replacement procedure:</center> A glass of poor quality or use of an adhesive of poor quality can cause many problems such as water leaks, whistling at high speed, rust or even blurred vision. An intact windshield is part of the car structure, it improves your safety in case of an accident. To avoid these problems we recommend our professional installers. Replacing a windshield requires an operation in multiple stages using only the approved adhesives that provide the proper safe drive-away times.
TYPICAL PROCEDURE
1- Protecting and prepairing the vehicule
2- Removing the wippers and moldings
3- Full cut out to remove the old windshield
4– Remove the old adhesive
5– Wiping the surface clean
6– Application of surface preparation primers
7– Choice of approved adhesive depending on temperature and drying time
8– Utilizing OEM glass
9– Reinstall the windshield wipers and moldings
10– Inspection and cleaning |