xicilijia

先检查Bios下设置，看看你有没有Disable软驱，

再修改启动顺序，把软驱设置成第一启动，然后随便插一张盘，看看能在启动时是否读取软驱，以确定软驱是否正常加载

在Windows下查看系统选项，是否磁盘驱动器没有加载，或是加载了不兼容的驱动。

实在不行，就换了。

Thunder2005

那是你没有见过single而已。不过是各个厂家的表达方式不同罢了。eric-01这段时间在这里回答问题比较积极，但如果想从这里挣到钱，难。

看看人家tommly，起早贪黑在这里回答问题，帮助大家，发贴580多次，只是偶尔打打广告而已，账户就被封了。

Post by eric-01
把软驱线都拔了，重起一便再装上，还有纠正个问题硬盘的跳线在ＩＤＥ线的旁边设置只有ＭＡＳＴＥＲ　ＳＬＡＶＥ　ＣＳＥＬ没有ＳＩＮＧＬＥ不行直接换了１０刀吗

bjrichard

Happy new year!

Just try eric-01 method,  no success. will try xicilijia method later when available.


换 90% not a solution.  below sems a reasonable solution. but  I can not try because my computer safe mode is for another Chinese operationg system (i guess)I already remove with hard disk .  so when I choose safe mode(in Chinese),
computer boot up normal in english operating system.

Boot up in Safe mode
Open Device Manager and look for the Floppy Disk Controller
Select it and click on "Remove"
Re-boot your system and the device will be detected properly.
Apparently Window can become corrupted and this is one of the drivers that often goes "walkabout"

anyway, thanks all of you.  I did not realize that this is a tough problem when I put

it in this forum. so just for fun and increase our knowledge for trouble shooting.

bumpkin

说不定就是软驱本身电路坏了。一个二手软驱最多五块钱，不用花那么多时间去搞了。实在想钻研技术，找些有实用价值的技术来学不是更好？