justgirl

我使用router将两个计算机连接起来,
它们怎么互相看不见?需要设置什么吗?
都装了Netbios协议和TCP/IP协议了.
是不是我买的router没有这功能?两台机器到是可以
同时上网.
机器型号是 -Link 4 Port cable Router DI-604

laobing

Hi, friend,
Is this router configured automatically, or you need to do the LAN configuration manually?
Check the router statement or even go and check the website of the maker.

I sense it needs manual setting, it is hard to judge where the problem is, not likely is the type of "plug and play". It it is used once before, may be it was set with the old IP address, start the checking with:

ipconfig
under dos mode.

Pls tell me where did you buy it, how much, I want to buy one and try the connection myself, then I can tell step by step.

laobing

Hi, friend,

Is your router
D-Link 4 Port cable Router DI-604
D-link is a good brand, where did you buy? New or used? How much? I want to get one to set up my own lan of 4 nodes.

start check with ipconfig command in dos mode.
IP address to the connected computers is generated automaticly, but the gate IP need the setting to be done manually, D-link has an DHCP modul built-in, so that you do not need to assgin the IP address for each node on lan.

WangYcca

有没有选“microsoft 网络的文件和打印机共享”

justgirl

我是在engros买的,原价99,现在买69,然后还有20块钱的rebate,10月31日前有效.

jim

justgirl
router如果不进行桥接设置（bridge)，是要丢掉netbios包的，因为它是广播报文。但是不是所有的router都有桥接功能。这不属于router的基本功能范畴。good luck

Anti-Exam

对..同意congirl的..!!^_^

DonCherry

Hi justgirl ,

Posts below have either this or that problem
or misleading.

Setup is very simple.
1. Make sure u enable Router's DHCP, this can be
   change back later if you don't like DUCP. But it is simple.
2. If you like static ip, you can set each machine
   as 192.186.x.x or 10..x.x.x not 172.18.x.x. 192
   or 10. are ip address which is not routable,which
   is used for private IPs.
3. If you don't have domain controler (assuming u
   don't setup a domain). Just put all machines in
   same workgroup, something like 'mygroup'.
   

That is.

If you want them all on internet, set the router
as Gateway. You need check the ip of the Gateway
which is router's ip, usually it is 192.168.x.x or
10.0.x.x. This typically is a class C IPs.

Good luck

Don

WangYcca

你回来用hub和cable modem接，看能共享不能。

DonCherry

congirl,

Thanks for interesting info. This is what I know,

Class Bits      Address Range  Max Hosts
A     0xxxxxxx  1-126          16,777,214

B     10xxxxxx  128-191        65534

C     110xxxxx  192.-223       254

D     1110xxxx  224-239        ?

E     1111xxxx  240-254        ?

Non Routable IP for NAT (Network Address Translation)
NAT is used by most simple Router and most software
router like Sygate, Win98seWin2000

Class A 10. 0.  0.0 - 10. 255.255.255
Class B 172.16. 0.0 - 172. 31.255.255
Class C 192.168.0.0 - 192.168.255.255