Tech Tip: Nissan MIL On/DTC P1491 Set
February 18, 2009
A 2001 Frontier (D22) or Xterra (WD22) may exhibit one or both of the following symptoms: MIL "On" with DTC P1491 (Vacuum Cut Valve Bypass Valve - VC CUT/V BYPASS/V) stored in the ECM; and/or difficulty refueling the vehicle. The vehicle's fuel tank may need to be replaced. Use the appropriate Service Procedure provided in this bulletin to diagnose and repair these incidents, if they should occur ....
<!-- END ARTICLE HEADLINE --> <!-- STORY TOOLS --> <table> <tbody><tr> <td style="vertical-align: middle;"> [url=javascript:SubmitEmailAFriend('/Article/46848/tech_tip_nissan_mil_ondtc_p1491_set.aspx',%20'Tech%20Tip:%20Nissan%20MIL%20On/DTC%20P1491%20Set',%20'46848')]  [/url] </td> <td style="vertical-align: middle;"> [url=javascript:SubmitEmailAFriend('/Article/46848/tech_tip_nissan_mil_ondtc_p1491_set.aspx',%20'Tech%20Tip:%20Nissan%20MIL%20On/DTC%20P1491%20Set',%20'46848')] Email [/url] </td> </tr> </tbody></table>
<table> <tbody><tr> <td style="vertical-align: middle;"> [url=javascript:SubmitPrinterFriendly('/Article/46848/tech_tip_nissan_mil_ondtc_p1491_set.aspx',%20'Tech%20Tip:%20Nissan%20MIL%20On/DTC%20P1491%20Set',%20'46848')]  [/url] </td> <td style="vertical-align: middle;"> [url=javascript:SubmitPrinterFriendly('/Article/46848/tech_tip_nissan_mil_ondtc_p1491_set.aspx',%20'Tech%20Tip:%20Nissan%20MIL%20On/DTC%20P1491%20Set',%20'46848')] Print [/url] </td> </tr> </tbody></table>
<table> <tbody><tr> <td style="vertical-align: middle;">  </td> <td style="vertical-align: middle;"> Comment </td> </tr> </tbody></table>
<table> <tbody><tr> <td style="vertical-align: middle;">  </td> <td style="vertical-align: middle;"> Sign up for eNewsletter </td> </tr> </tbody></table>
<table> <tbody><tr> <td style="vertical-align: middle;">  </td> <td style="vertical-align: middle;"> <script language="javascript" type="text/javascript"> function addToFav() { title = document.title; url = this.location; if (window.sidebar) { // Mozilla Firefox Bookmark window.sidebar.addPanel(title, url,""); } else if(window.external) { // IE Favorite window.external.AddFavorite( url, title); } else if(window.opera && window.print) { // Opera Hotlist return true; } } </script> Bookmark this website </td> </tr> </tbody></table>
<!-- END STORY TOOLS --> <!-- ARTICLE SIDEBAR --> <!-- Article Content --> <!-- c --> A 2001 Frontier (D22) or Xterra (WD22) may exhibit one or both of the following symptoms:
- MIL “On” with DTC P1491 (Vacuum Cut Valve Bypass Valve – VC CUT/V BYPASS/V) stored in the ECM; and/or
- Difficulty refueling the vehicle.
The vehicle’s fuel tank may need to be replaced. Use the appropriate Service Procedure provided in this bulletin to diagnose and repair these incidents, if they should occur. Service Procedure
Warning: Before performing any of the Service Procedures below, be certain there are no ignition sources (i.e., open flames, sparks, etc.) in or around the vehicle/work area. Make sure the appropriate rated fire extinguisher is available for immediate use.
MIL “On” With DTC P1491 Stored:
- Connect CONSULT-II.
- Turn the ignition key to “on” but do not start the engine.
- Select “ENGINE,” “DATA MONITOR,” “EVAP SYSTEM PRESSURE SENSOR.”
- The pressure sensor value should read between 3.32 and 3.40 volts (3.36 volts is the nominal value):
- If the value is between 3.32 and 3.40 volts, proceed to step 5 below.
- If the value is not between 3.32 and 3.40 volts, refer to the EC Section of the vehicle-specific service manual for diagnosis of DTC P0450 (EVAP System Pressure Sensor) to repair the vehicle.
5. Start the engine and allow it to idle. 6. Monitor the EVAP Pressure Sensor value with the engine idling:
- If the EVAP System Pressure Sensor value decreases more than 0.02 volts from the reading shown in step 4, the EVAP Purge Volume Control Solenoid Valve (in the engine room) is leaking engine vacuum (not sealing). Replace the EVAP Purge Volume Control Solenoid Valve.
- If the EVAP System Pressure Sensor value decreases less than 0.02 volts from the reading shown in step 4, or does not change at all, replace the fuel tank and O-ring.
Note: Refer to the vehicle-specific service manual, Section FE (Fuel and Exhaust)/Fuel System/Removal And Installation/Fuel Tank for detailed instructions on fuel tank removal and installation. Follow all warnings and cautions provided in the service manual. Difficulty Refueling the Vehicle
1. Use a suitable device to remove the fuel from the fuel tank.
2. Check that the two metal pipes attached to the Fuel Filler Neck are clear (see Figure 1).
Notes:
- Mark the pipes and hoses before disassembly. Use duct tape and an indelible marker (see Figure 1). This is so they can be correctly identified for reassembly. If the hoses are later reconnected incorrectly, refueling difficulties may occur.
- One of the pipes has a restrictor inside of it and will flow slightly less than the other, however, they should both be clear (not blocked).
- The pipe with the restrictor is connected to the lower of the two nipples on the fuel tank. This is the signal line. The upper nipple is connected to the filler neck pipe without a restrictor in it. This is the recirculation line.
3. Remove the large diameter refueling hose that attaches onto the charge port of the EVAP canister (see Figure 2). 4. Try to refuel the vehicle:
- If the vehicle is no longer difficult to refuel, check the EVAP canister and water separator and hoses for restrictions/debris and repair/replace as needed.
- If the vehicle is still difficult to refuel, replace the fuel tank and O-ring.
Caution: Remember to reattach the hose disconnected in step 3. Courtesy of Mitchell 1.Post by zhul3;2212628
也来请教一下阿慢师傅，我的nissan altima 2000 的SES灯最近亮了，读码之后是”P1491，vacuum cut value bypass value", 找朋友消掉之后，一天之后又出来了。
请问是什么问题？严重吗？不知送车行修修要多少钱？
有朋友告诉我不用管，我担心车会更费油，本来就不是省油的灯（2.4L）。。。
有朋友说要换 vaccum cut solenoid 和 vaccum valve， 请问贵吗这两样？
谢谢。 |
楼主
发表于 2009-4-17 09:47
46岁前央视主持人自曝，子宫已全切....
马斯克不满游戏厂商，宣布将成立游戏工作室
女留学生哭诉:父母耗尽毕生积蓄送她出国 现
lululemon黑五大促